PD-1 Telco Dialer

  • For Symetrix DSP-hosted telco interface (VoIP or Analog) cards
  • Physical 12-button dial pad with four soft key function buttons
  • Familiar, intuitive phone features
  • 100 unique speed dial numbers per PD-1
  • Up to 80 PD-1 dialers per system
  • 320 x 240 backlit LCD display
  • Batch programming of multiple PD-1 Telco Dialers
  • PoE powered
  • Symetrix 5-Year Warranty

The PD-1 Telco Dialer enhances Symetrix DSP-systems by giving users familiar, easy-to-use telco features in a compact, attractive table-top unit. A physical 12-button dialing keypad, volume, mute and function buttons are positioned below a 3.5-inch multi-function LCD screen.  Take advantage of 100 programmable speed dial numbers, DND, full conferencing functions such as Join, Split, Disconnect, and many other features.

The PD-1 Telco Dialer is easily programmed through our industry-standard Composer software (version 7.1). Each PD-1 Telco Dialer also includes a concealed, rear-panel reset switch.

Hover over image to enlarge

Data Sheets and Product Briefs

Quick Start Guides

Full Line Catalog

General Specifications

Display 3.5” Diagonal LCD, 320x240, 24bit RGB
Buttons 3.25 total – 12-key standard phone pad, 2 appearance selection buttons, 4 soft key function buttons, 1 hook control button, 4 volume buttons, and 2 mutes.
Compatibility Symetrix VoIP Interface card, Analog Telephone Interface card, and hosting DSPs.
Ethernet Cable Standard CAT5e or CAT6, maximum device-to-device length = 100 meters.
Power PoE IEEE 802.3af Class 0, 15 Watts maximum.
Maximum Devices Per System 80 units per Site File.
Maximum Speed Dials 100.

Mechanical Data

Space Required Tabletop (WDH: 4.81 in x 6.1 in x 4.2 in / 12.22 cm x 15.5 cm x 10.67 cm). Depth does not include connector allowance.
Ventilation Maximum recommended ambient operating temperature is 30 C / 86 F.
Certifications or Compliance Safety: UL 60065, cUL 60065, IEC 60065 EMC: “Class A” device (applies to all of the following) EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, FCC Part 15, ICES-003. Environmental: RoHS
Shipping Weight 2.35 lbs (1.07 kg)

Architect and Engineer Specifications: PD-1 Telco Dialer

The hardware dialer shall be designed exclusively for use with Symetrix DSP-hosted telco interfaces. The dialer shall provide all call management functions and support 100 programmable speed dial numbers.

Symetrix Composer software shall be provided that operates on a Windows computer, with network interface installed, running Windows 7® or higher operating system. Computer connection for configuration shall be via the device’s rear (bottom) panel Ethernet connector.

The front panel shall include 25 buttons and a display. The display shall provide call management details plus operational and system status.

All program memory shall be non-volatile and provide program security should power fail. The device shall provide time and date display and may sync to NTP or a DSP unit in the same site.

The device shall be powered over Ethernet (PoE) by an IEEE 802.3af Class 0 standard compliant switch or the included injector. The device shall meet UL/CSA and CE safety requirements and comply with CE and FCC Part 15 emissions limits. The device shall be RoHS compliant. The chassis shall be constructed of Galvalume and molded plastic.

The device shall be a Symetrix PD-1 Telco Dialer.

Installed Sound DSP

  • Symetrix Edge DSP with expansion cards
  • Symetrix Radius AEC and 12x8 EX DSPs

Radius and Edge Expansion Cards