Training

SYMNET COMPOSER ONLINE TRAINING

Train and certify on the SymNet Edge platform at your convenience with SymNet Composer Online Training. The training will cover all aspects of hardware and software, and provide fundamental programming and design concepts. Learn by watching, listening and/or reading. It’s your choice. Subjects are broken into short, manageable chapters to make assimilation of the information quick and easy. You may complete each course on your own schedule; pause and return as many times as you like. Each participant who completes the training will be awarded a SymNet Composer Training Certificate.

To receive a SymNet Composer Training Certificate, you must register for the online training and answer at least 80% of the questions correctly at the end of every chapter. Participants who successfully complete the training will be added to a list of certified SymNet Composer users. Certified SymNet users will be asked to renew training once a year. Test-out options are available.

Getting Started
To get started, click to register. Following registration, an e-mail will be sent with a link to the log-in page.

If you have already registered for SymNet Composer Online Training, click to go directly to the log-in page.

The following topics are covered in the SymNet Composer Online Training Curriculum.

• Chapter 1: Edge Overview
• Chapter 2: Hardware Overview
• Chapter 3: Card Setup and Configuration
• Chapter 4: Network Configuration and Design
• Chapter 5: SymNet Composer Software – Part 1
• Chapter 6: SymNet Composer Software – Part 2
• Chapter 7: Basic Site File Design
• Chapter 8: Networking Audio with Edge
• Chapter 9: Control Screens
• Chapter 10: Going Online
• Chapter 11: Control Modules and Custom Logic
• Chapter 12: External Control Overview
• Chapter 13: Controller Numbers and Programming ARCs
• Chapter 14: SymVue and External Control
• Chapter 15: Commissioning and Troubleshooting

If you would prefer to download the chapters to your computer, simply right-click on the chapter links listed above and choose “Save Link As…”, “Download Linked File As…”, “Save Target As…”, or the like in order to save the videos to your computer. Otherwise, some browsers may try to play the video instead of downloading it. Remember – to receive a SymNet Composer Training Certificate, you must register for the training and complete the online quizzes.

SYMNET EDGE IN-PERSON TRAINING

• Tuesday, June 12th, 2012 – 9:00 am to 4:00 pm PDT, Las Vegas, NV

To register, or for more information, email tech@symetrix.co or contact Symetrix Inside Sales at +1.425.778.7728.

SYMNET DESIGNER ONLINE TRAINING

Syminar Online Training will introduce you to the fundamental skills and concepts behind SymNet Designer. You may complete each course on your own schedule; pause and return as many times as you like. You set the pace! After completing the courses, you can return at any time for a quick brush-up and even search by keyword to find a specific topic within each course.

Following each course, a short quiz will test your new SymNet Designer knowledge. Complete and pass each quiz in order to receive a Basic Level Certificate from Symetrix.

Syminar Online Training is not equivalent to SymNet Edge Training. You must complete SymNet Edge in-person or online training to be eligible for a SymNet Edge Training Certificate.

The following topics are covered in the SymNet Designer Basic Level Training Curriculum:

1. SymNet Hardware
2. SymNet Designer Software
   1. Overview
   2. Menus
   3. Example Site File
3. Basic Site File Design
4. Routing
5. Control Screens and Presets
6. External Control
7. Commissioning

Note: There is no audio in these presentations. Speakers and/or headphones are not required!

Getting Started
To get started, click to register. Following registration, an e-mail will be sent with a link to the log-in page.

If you have already registered for SymNet Designer Online Training, click to go directly to the log-in page.

ARCHIVED ON DEMAND TRAINING
Did you miss an event you wanted to attend? Need a refresher on one you did? Below is a list of archived training events, master classes, etc. you can review on your own time in your web browser.

1. Syminar Online Master Class – Networking for Audio Integrators — January 28, 2009
2. Syminar Online Master Class – SymNet Designer 9.0, SymVue and Control Screens — February 25, 2009
3. Syminar Online Master Class – Beyond 64: Expanding I/O using SymNet — March 25, 2009
4. Syminar Online Master Class – SymNet External Control: From A – Z — April 29, 2009
5. Syminar Online Master Class – Redundancy, Tracking Drop Outs, and Error Reporting — May 27, 2009
6. Syminar Online Master Class – Advanced Zone Mix 760 Techniques — June 24, 2009
7. Syminar Online Master Class – AirTools Voice Processor 2x — August 26, 2009
8. Syminar Online Master Class – Advanced Paging for SymNet Applications — September 23, 2009
   Download the SymNet Site File for this Master Class.
9. Syminar Online Master Class – Connection Basics — November, 11th, 2009
10. Syminar Online Master Class – Control Signals: Harness the Power of SymNet — November 24, 2009
    Download the SymNet Site File for this Master Class.
11. Syminar Online Master Class – SymNet Designer Basics — December 9th, 2009
12. Syminar Online Master Class – Super-Modules: Programming made Quick and Easy — December 30th, 2009
13. Syminar Online Master Class – Integrator Series for Beginners — January 13th, 2010
14. Syminar Online Master Class – Adaptive Remote Controls – Form, Function & Programming. — February 10th, 2010
15. Syminar Online Master Class – Advanced SymVue Design — February 24, 2010
    Download the SymNet Site File for this Master Class.
16. Syminar Online Master Class – SymVue for Beginners — March 10th, 2010
17. Syminar Online Master Class – Sound Masking — April 1st, 2010
18. Syminar Online Master Class – Networking for Audio Integrators II — April 14th, 2010
19. Syminar Online Master Class – Creating the Ultimate SPL Auto-Gain System — April 28th, 2010
20. Syminar Online Master Class – Application Series #1: Room Combine with Automixing — May 12th, 2010
21. Syminar Online Master Class – Conferencing and AEC — May 26th, 2010
22. Syminar Online Master Class – Application Series #2: Audio Distribution — June 16th, 2010
23. Syminar Online Master Class – Introduction to Jupiter — June 30th, 2010
24. Syminar Online Master Class – Application Series #3: Automixing — July 14th, 2010
25. Syminar Online Master Class – Controlling Symetrix Hardware Over the Internet — August 25th, 2010
26. Syminar Online Master Class – Application Series #4: Public Address — September 15th, 2010
27. Syminar Online Master Class – Application Series #5: Sound Reinforcement — November 17th, 2010
28. Syminar Online Master Class – Application Series #6: AEC - January 12th, 2011
29. Syminar Online Master Class – SymVue Templates for the 760, 780, 788, 2x, & 2m – February 2, 2011
30. Syminar Online Master Class – SymNet Modules – March 16th, 2011
31. Syminar Online Master Class – ARC-WEB – May 11th, 2011
32. Syminar Online Master Class – SymNet Solus – July 13th, 2011
33. Syminar Online Master Class – SymNet & Jupiter External Control – August 17th, 2011
34. Syminar Online Master Class - 761 & ARC-WEB - October 19th, 2011
35. Syminar Online Master Class - Solus 16 - November 29th, 2011