Where can I find AutoCAD files for the 450 Dual Zone Priority Mixer?
450 AutoCAD
: 450 Dual Zone Priority Mixer
Where can I find a Data Sheet for the 450 Dual Zone Priority Mixer?
450 Data Sheet
Where can I find a Flow Chart for the 450 Dual Zone Priority Mixer?
450 Flow Chart
Where can I find a User’s Guide for the 450 Dual Zone Priority Mixer?
450 User's Guide
How do I disable the phantom power from the mic inputs on the 450 Dual Zone Priority Mixer?
To disable phantom power from microphone input #1: 1. Disconnect power from the 450. 2. Remove the 0-ohm jumper R48 in the extreme left rear corner of the 450. 3. To disable phantom power from microphone input #2: Disconnect power…
How do I convert the stereo outputs to mono on the 450 Dual Zone Priority Mixer?
Disconnect power from the 450. Solder a insulated wire jumper to the rear half of JP8. Be careful not to bridge the gap between the front and rear portion of JP8. Solder the other end of the wire jumper to…
What is the stereo separation on the 450 Dual Zone Priority Mixer?
Greater than -60 dB when measured at 1000 Hz. Greater than -35 dB when measured with a 18 kHz tone.
How do I lengthen priority release time on the 450 Dual Zone Priority Mixer?
Increase the value of the following resistors for the appropriate priority: Priority 1: R229 and R230 Priority 2: R321 and R322 Priority 3: R141 and R142 The amount of time increases in direct proportion to the amount that you increase…
Where can I find Schematics for the 450 Dual Zone Priority Mixer?
450 Schematics
