Where can I find AutoCAD files for the 460 Presentation Audio Mixer?
460 AutoCAD file
: 460 Presentation Audio Mixer
Where can I find a Data Sheet for the 460 Presentation Audio Mixer?
460 Data Sheet
Where can I find a User’s Guide for the 460 Presentation Audio Mixer?
460 User's Guide
Where can I find the External Control Protocol for the 460 Presentation Audio Mixer?
460 Control Protocol for v1.0-1.05 460 Control Protocol v1.06 460 Control Protocol v1.08 and higher
Are Crestron modules available for the 460 Presentation Audio Mixer?
Crestron has provided Symetrix and its user base this archive for the benefit of SymNet and Crestron developers. Should you have any comments, questions or problems with the files contained in this archive, please contact Crestron Technical Support. Symetrix, Inc.…
What do I do if there is no output signal from the 460 Presentation Audio Mixer?
Check cables and connections to see if: 1. Outputs are driving inputs and inputs are fed from outputs. 2. Signal from the source(s) is getting to the 460. 3. The signal chain after the 460 is functioning. 4. Check if…
What do I do if I have a buzz or hum in the output of the 460 Presentation Audio Mixer?
1. Check input connector wiring. 2. Check output connector wiring. 3. If the hum or buzz is present in inputs 3 or 4, try connecting the chassis of the source equipment to the chassis of the 460. 4. Check for…
What do I do if I’m experiencing distortion on the mic inputs of the 460 Presentation Audio Mixer?
Lower the gain settings for inputs 1 & 2 using the DIP switches. (Applicable only to inputs 1 & 2).
What do I do if I’m experiencing noise (hiss) from the 460 Presentation Audio Mixer?
1. Check input signal levels and level control settings. 2. Check to see if the source signal is noisy. 3. Check if there is too much noise downstream by using the output level controls of the 460 at Mute.
What do I do if I’m experiencing an intermittent input on the 460 Presentation Audio Mixer?
Check inward downward expander (gate). The threshold setting may be too high.
