Where can I find a User’s Guide for the 6000 Broadcast Audio Delay?
6000 User's Guide
: 6000 Broadcast Audio Delay
Where can I find a Data Sheet for the 6000 Broadcast Audio Delay?
6000 Data Sheet
How does the Automation Control Interface work on the 6000 Broadcast Audio Delay and 6100 Broadcast Audio Delay?
The 6000 and 6100 have four internal relays that may be independently used to control station automation events. The relay closures (outputs) are triggered by input closures that can be either manual (a momentary switch closure) or electrical (TTL logic…
Can multiple 6000 or 6100 units be controlled by a remote (RC-6000) to dump, cough, start and exit at the same time?
Yes, although custom wiring is required. You would do this by wiring to the contact closure and ground pins on the back of both units in parallel, and then wiring the remote LED indicator pins from just one of the…
How do I reset the 6000 Broadcast Audio Delay or 6100 Broadcast Audio Delay to factory default settings?
Hold down the previous, next, and home buttons in while powering up the unit.
Why does my 6000/6100 have audible artifacts while building delay?
Change or adjust the delay algorithm and/or delay ratio. Find the algorithm and delay ratio that is the most appropriate for the program material. For more information reference the unit’s User’s Guide.
Can I build a custom control panel for my 6000/6100?
Yes. See wiring and pinout information in the User’s Guide.
Why does my 6000/6100 show ‘64P’ on the display and is not operating?
The bypass is engaged and ‘BYP’ is commonly mistaken for ‘64P’ on the display.
Can I purchase a replacement power supply for my 6000/6100 factory direct?
Yes. Have the unit serial number handy and contact support@symetrix.co or call +1 425 778 7728.
Can I upgrade my 6000/6100 delay time to 40 seconds?
Yes. Have the unit serial number handy and contact support@symetrix.co or call +1 425 778 7728.
