Will phantom power damage my non-condenser microphones?
Generally no, some older ribbon microphones are somewhat susceptible, but it's always a safe bet to disable phantom power when not needed.
: 8 In
Where can I find an Ethernet application with IP capable Symetrix products?
SymNet Remote Terminal is a UDP terminal test application for testing Ethernet-based control for Symetrix products. SymNet Remote Terminal.zip
Where can I find some example Site Files for SymNet Designer?
Example Designer Site Files: Two Switches 64x64 Matrix Arena BGM Distribution BreakIn12 Routing Example Button Logic Circular Routing Example Express Church Express Room Combine Large Conference Center Reverse Compressor Voice Processor
Where can I find a Data Sheet for the 8in DSP, or 8out DSP?
SymNet Brochure (June 2004 archive)
What is the maximum recommended length of an RS-485 cable?
4000 feet is the longest recommended cable length.
What is DSP and how does to apply to Composer-based hardware?
Advanced Digital Signal Processing is at the core of our Composer-based hardware. Our solutions simply design and deliver superb fidelity, adding value for designers, integrators, and end users.
Where can I find the External Control Protocol for SymNet SymLink, Express, and Solus units?
The External Control Protocol for SymNet units can be found below. This document covers all third-party control for SymNet units including both RS-232 and UDP (IP). SymNet External Control Protocol
What is Phantom Power?
Phantom power derives its name from its invisibility to audio signals, even though the microphone cable carries both phantom power (as direct current) and audio signals (as alternating current). Specifically, the term phantom power means a positive DC voltage sent…
Will phantom power damage my non-condenser microphones?
Generally no, some older ribbon microphones are somewhat susceptible, but it's always a safe bet to disable phantom power when not needed.
How much latency is there in a SymNet SymLink system?
This question has a three part answer since the digital signal path through a SymNet system has three different major components. Converter delay: Approximately 850 microseconds for the AD, and 624 microseconds for the DA. One DSP core: Maximum delay…
