Where can I find AutoCAD files for the ADA8824 (ADAT) Converter?
ADA8824 (ADAT) AutoCAD file
: ADA8824 (ADAT) 24-bit Eight Channel A/D-D/A Converter
Where can I find a Data Sheet for the ADA8824 (ADAT) 24-bit Eight Channel A/D-D/A Converter?
ADA8824 (ADAT) Data Sheet
Where can I find a User’s Guide for the ADA8824 (ADAT) 24-bit Eight Channel A/D-D/A Converter?
ADA8824 (ADAT) User's Guide
What PCI cards and software work with the ADA8824 (ADAT) 24-bit Eight Channel A/D-D/A Converter?
The ADA8824 (ADAT) works with the Alesis ADAT Connect and ADAT Edit software using their PCR PCI card. We've also tested the ADA8824 with the SonorusStudi/o card using Cubase VST. Virtually any PCI card which has either ADATLightpipe, AES or…
Will the ADA8824 (ADAT) 24-bit Eight Channel A/D-D/A Converter work with ProTools?
Yes. While Digidesign encourages its customers to use their own proprietary hardware it is possible to make digital audio transfers to and from ProTools using industry standard AES or ADAT (lightpipe) connections. If you are a ProTools user and have…
What is the maximum sample rate for the ADA8824 (ADAT) 24-bit Eight Channel A/D-D/A Converter?
48 kHz.
Where do I set the analog I/O levels of the ADA8824 (ADAT) 24-bit Eight Channel A/D-D/A Converter to match my setup?
This can be accomplished using the provided 8824 Configuration application via MIDI System Exclusive messages. The analog I/O level sliders of the 8824Config app provide gain control in 1dB increments from -96dB to +31dB for each of the 8 analog…
What is the I/O headroom on the ADA8824 (ADAT) 24-bit Eight Channel A/D-D/A Converter?
In both local modes (+4) and remote (+4/-10), the default headroom is set to 20dB. Therefore, setting the unit to +4 means the maximum input is +24dBu, and that the maximum output level is +24dBu (+/- 0.5dB). By using the…
How do I use an external Word Clock with the ADA8824 (ADAT) 24-bit Eight Channel A/D-D/A Converter?
Connect the external Word Clock signal to the Word Clock input. If the cable run is longer than approx 6ft, external 75ohm termination is required (it is recommended at all times). Then, simply set the A/D sync source to "Word…
Can I sync to the AES inputs on the ADA8824 (ADAT) 24-bit Eight Channel A/D-D/A Converter?
The 8824's A/Ds can be synchronized to the first 3 AES3 inputs, and also the S/PDIF input. Simply connect a valid AES3 or S/PDIF signal to the desired input (24kHz-48kHz only), and select that input as the A/D Sync Source,…
