Did you know that it is possible to make SymVue control any Symetrix Integrator Series and Jupiter DSP? That’s right; SymVue has the ability to control the Integrator Series 722, 760, 761, 780, 788, Jupiter 4, 8, and 12.
: Deuce 722
Not many software applications are multi-platform. In fact, most commercial audio software is Windows-only. However, that doesn't mean you must use a PC. Unlike Windows PCs, Macs have the ability to run Mac OS X and other OS.
If you have successfully completed the Connection Wizard but when attempting to ‘Go On-line’ with hardware you receive a ‘Connection Error’ message, then it is possible that proxy server settings are enabled on your computer and are preventing network communications…
SymNet Remote Terminal is a UDP terminal test application for testing Ethernet-based control for Symetrix products. SymNet Remote Terminal.zip
The latest firmware is always bundled with the latest software. There is no need to manage the firmware independently.
CS - Controller set. Generally use for buttons. CC - Controller change. Generally use for faders. LP - Load preset. Examples: CS <controller number><controller position><cr> CC <controller number><1 for increment or 0 for decrement><amount><cr> LP 1
2, 3, 5, straight-through.
Host control (via the Integrator Series software applications) is over Ethernet. 3rd-party control (AMX and Crestron type systems) may also interface over Ethernet, or by RS-232 on certain Integrator Series products (such as Zone Mix 760's shipped after January 1,…
The factory reset button is located just to the left of the device’s Ethernet port. Using a pen or a paper clip, depress this button and continue to hold it down. While doing this, unplug the device, wait about 10…
Deuce 722 AutoCAD file