Where can I find an Ethernet application with IP capable Symetrix products?
SymNet Remote Terminal is a UDP terminal test application for testing Ethernet-based control for Symetrix products. SymNet Remote Terminal.zip
: Express 12x4
What is DSP and how does to apply to Composer-based hardware?
Advanced Digital Signal Processing is at the core of our Composer-based hardware. Our solutions simply design and deliver superb fidelity, adding value for designers, integrators, and end users.
Can I talk to Composer-based DSPs using HyperTerminal?
If the unit has RS-232 control, yes. HyperTerminal can be used to simulate an external controller. Default settings: Baud: 38400 Data bits: 8 Parity: None Stop bits: 1 Flow control: None
What pins are used on the serial cable?
2, 3, 5, straight-through.
How do I set the IP address of a SymNet Express unit?
Establish serial communication. Edit menu > Site Ethernet Preferences. Click on the Ring you wish to configure. Click Edit Unit Settings. Enable IP control, then enter the appropriate IP information and click Write Settings to Unit. Or, Read Settings from…
Does Express have a default IP address?
No. IP settings are static and user specified.
Is Express DHCP capable?
No.
Should Symetrix hardware have an extra rack space above and below it in the equipment rack?
Anecdotal evidence suggests a longer life-span of Symetrix hardware that is separated by at least one additional space in the equipment rack. This is in addition to following the guidelines for maximum recommended ambient operation temperature. See unit’s Quick Start…
USB to serial (RS-232) converter and Symetrix manufactured products.
Many USB to serial converters (RS-232) were designed and manufactured before the release of Windows XP. If you are having trouble connecting to a device with a USB to serial converter, make sure you have a current driver. Go to…
The updated Designer 9.0 example design files and super-modules did not install with SymNet Designer 9.0 or higher.
If you are installing the full release version 9.0 but had a beta version previously installed, you must first completely uninstall the beta version for the new example files to appear. If the example design files and super-modules do not…
