SymNet Remote Terminal is a UDP terminal test application for testing Ethernet-based control for Symetrix products. SymNet Remote Terminal.zip
: Express 4x12
Advanced Digital Signal Processing is at the core of our Composer-based hardware. Our solutions simply design and deliver superb fidelity, adding value for designers, integrators, and end users.
About 10mA per input. Each input supply is current limited so a short in one input will not adversely affect other inputs.
If the unit has RS-232 control, yes. HyperTerminal can be used to simulate an external controller. Default settings: Baud: 38400 Data bits: 8 Parity: None Stop bits: 1 Flow control: None
2, 3, 5, straight-through.
Establish serial communication. Edit menu > Site Ethernet Preferences. Click on the Ring you wish to configure. Click Edit Unit Settings. Enable IP control, then enter the appropriate IP information and click Write Settings to Unit. Or, Read Settings from…
No. IP settings are static and user specified.
Anecdotal evidence suggests a longer life-span of Symetrix hardware that is separated by at least one additional space in the equipment rack. This is in addition to following the guidelines for maximum recommended ambient operation temperature. See unit’s Quick Start…
Many USB to serial converters (RS-232) were designed and manufactured before the release of Windows XP. If you are having trouble connecting to a device with a USB to serial converter, make sure you have a current driver. Go to…