Archived versions of all final public releases of Composer software are listed in the table below. The software runs on a Windows PC and is used to configure, design, and control Composer-based products. For new designs we highly recommend using…
: xIn 12
Tech Tip: Cable Wiring Guide
All Dante devices ship with Dante in the default “Switched mode”. This allows units to be daisy chained, eliminating the need for 3rd party networking hardware. When in “Switched mode” if the Dante hardware is setup physically in a Redundant…
Often times during commissioning, pushing the site file to the SymNet system will be performed multiple times. By disabling the xIO devices from the Push process, it is possible to shave many minutes off of the overall commissioning time.
White Paper: Connect the Shure Dante series wireless receiver to Symetrix Dante hardware
White Paper: Dante Virtual Soundcard for the end user and audio integrator
Top 10 Reasons to use Dante and a Dante Virtual Soundcard (Sales Tip Sheet / PDF)
White Paper: Latency of a SymNet System
Learn the quick and easy steps for assigning SymNet Dante ports to a static IP address.
White Paper: Specifics for Dante Subscriptions, 3rd Party Dante Sources, and Real-time Dante Matrixing