Archived versions of all final public releases of Composer software are listed in the table below. The software runs on a Windows PC and is used to configure, design, and control Composer-based products. For new designs we highly recommend using…
: xControl External Control Expander
Learn how the Selected Wire Audio Module works as a signal path probe, where any wire in the SymNet Composer signal path can be selected with a mouse click to route it’s audio to a matrix, an analog output, or the Dante Virtual Soundcard.
No, both ports can receive incoming commands, but they can also be used to send data, including both feedback and custom RS-232 strings.
No, the power supply for the legacy Control I/O is not compatible with the xControl. A POE injector ships with the xControl.
No, the xControl is a true POE device that communicates to the DSP hardware over Ethernet.
No, while the Control I/O was programmed in the Controller Manager in SymNet Designer, the same cannot be said about the xControl. The xControl is added to the Site View of Composer just like a SymNet DSP. Once in the…
Yes, the Edge does have local GPIO so the xControl is not needed in most cases. The Edge frame has 8 analog control ports (8 pots or 16 switches) and 8 Logic Outputs.
SymNet Remote Terminal is a UDP terminal test application for testing Ethernet-based control for Symetrix products. SymNet Remote Terminal.zip
Standard two-conductor shielded twisted pair.
All technical and operational instructions and documentation for current Symetrix products are contained within the Help menu of the Designer and/or Composer software. Simply click on the question-mark icon on the toolbar in Designer/Composer and search your topic. Download the…