: xOut 4

No- The xIn 4, xIO 4x4 and xOut 4 have a 100 Base-T Ethernet port that provides 8 (4x4) channels of Dante network audio, Ethernet communications, and power.  Symetrix suggests connecting to a gigabit switch. Especially if multiple devices with…

The xIn 4, xIO 4x4 and xOut 4 are powered over Ethernet (PoE) by an IEEE 802.3af Class 0 standard compliant switch or the included injector. No other external power supply is needed or used.

No- The xIn 4, xIO 4x4 and xOut 4 Dante Interface I/O interface is based upon the Audinate Ultimo chip that supports 4x4 channels of Dante networked audio.

Yes- Under Table/Surface Mount Kits consists of a U-shaped bracket and two mounting screws. With this kit, a single unit can be secured under a table or to another flat surface as required. (Mounting solutions sold separately).

Yes- The Rack Mount Kits consists of a rack tray and four mounting screws. With this kit, one or two units can be mounted side-by-side in a single rack space. (Mounting solutions sold separately).

No- The xIn 4, xIO 4x4 and xOut 4 are based upon Audinate’s Ultimo Dante chip which does not have a redundant mode. They should be connected to the primary Dante network. Other standard IT practices of network redundancy can…

No- The xIn 4, xIO 4x4 and xOut 4 have a single Dante port and Power over Ethernet (PoE) cannot be daisy-chained. They can be directly connected to the main DSP (via a PoE injector), but not to each other.

No- The xIn4, xIO 4x4 and xOut 4 are part of a series of I/O expansion products for the Symetrix DSP products (Edge and Radius) using Dante network audio.