DSPs and ARC-PS; adapting CAT5 for RS-485 Terminal Block

TECH TIPS Connecting ARCs to Jupiter hardware is simple using the (RJ-45) ARC port on either the front or back of the device. These ports not only provide communication (RS-485) data, but also +24 VDC power. If the required number…

Learn More

xControl: Flexible External Control Expansion

The SymNet xControl serves a similar purpose for Edge and Radius as the Control I/O did for legacy SymNet SymLink and Express Cobra hardware. Its primary purpose is to bring the overall cost of logic I/O heavy systems down.

Learn More

VoIP Digit Map

The Digit Map (also called the Dial Plan) defines a collection of digit pattern templates that are used to match valid dial strings, for example 7-digit or 10-digit dialing, as the user enters digits.

Learn More

Using the SymNet Composer Radius 12×8 to Radius EX Migration Feature

With the release of the Radius EX and the discontinuation of the Radius 12×8, it may be desired to convert a Radius 12×8 Composer site file into an equivalent Radius 12×8 EX Composer site file.

Learn More

Using Symetrix USB Audio Card with For The Record Gold Software

The Symetrix USB Audio Card’s USB port can be used to receive or transmit up to 8×8 channels of digital audio to a PC. One application where this is particularly useful is court recording systems.

Learn More

Using Momentary Buttons in SymVue on a Touchscreen PC in Composer

Due to the inherent nature of touchscreens, the use of momentary buttons on control screens in SymVue may result in some unexpected behavior – when the user touches a button on the screen, the “on” action isn’t sent to the DSP until the user actually releases their finger from the button.

Learn More

Using Dante’s Device Lock Feature with Symetrix Dante-enabled Hardware

The purpose of this Tech Tip is to provide instructions on using Dante’s Device Lock feature with Symetrix Dante-enabled hardware in Composer 6.0 or later.

Learn More

Using AES67 with Symetrix Dante-enabled DSPs

The purpose of this Tech Tip is to provide information and instruction on using AES67 with Symetrix Dante-enabled DSPs.

Learn More

USB Audio Card Symetrix Driver Windows 1×1 Mode Fix

Once you’ve installed the Symetrix driver (Symetrix USB Audio v4.14.0 Setup) on your Windows machine and configured the USB Audio Card to run in 8×8 mode, switching to 1×1 modes may result in interrupted audio.

Learn More

Upgrading Firmware with Composer

The purpose of this document is to provide information and set by step instructions for the proper firmware upgrade process.

Learn More