Symetrix

Category: Composer

Tech Tips

Upgrading Firmware with Composer

The purpose of this document is to provide information and set by step instructions for the proper firmware upgrade process.

Transient Suppressor DSP Module in Composer

A new feature that has been added to SymNet Composer 2.0 is the Transient Suppressor. A Transient Suppressor reduces the level of non-program audio, transients from a microphone input.

String Output Modules in Composer

The purpose of this document is to provide an understanding of operation and configuration of the two different String Output modules available within SymNet Composer. The two different types or modules are the String Output and Network String Output.

SPL Computer in Composer

A SPL (Sound Pressure Level) Computer adjusts the level of program material based upon a measurement of the ambient noise. It is typically applied where background, or foreground music must be slightly louder than a variable level
crowd noise. SymNet

Sound Masking with SymNet Composer

Sound masking is the addition of natural or artificial sound (such as pink noise) into an environment to cover up unwanted sound by using auditory masking. Sound masking reduces or eliminates awareness of pre-existing sounds in a given area and

Setup Dante in 5 Minutes Time or Less in Composer

SymNet Composer is intuitive, open architecture, drag-n-drop DSP software for any and all commercial or live sound applications using Symetrix SymNet Dante enabled DSP hardware. Additionally, Audinate’s Dante has arrived in full force and is quickly becoming the industry standard,

Recommendations for using Yamaha Dante Consoles with Composer

Among the hundreds of manufacturers that have adopted Dante as their networked audio bus of choice, Yamaha and SymNet stand out as early adopters and trendsetters for developing and standardizing products based around the Dante protocol.

New Example Conferencing Site Files in Composer 6.0

Symetrix has added new example conferencing site files available for conferencing applications using the Radius AEC and the 2 Line VoIP Interface Card located in the Documents\Composer 6.0\Designs\examples\Conferencing\New Site Files folder.


How can we help?