Processing and Control for Professional AV Installations

Knowledge Base

Empower End-Users with Control and Logic Modules for Composer

The video on this page is part of the Symetrix training program of the same name. If you have already completed your Composer certification, you can utilize these videos to catch up on the latest products and techniques. If you have not yet earned your certificate, please access this content through our online training center.

Learning Objectives

  • Explore Symetrix Composer’s extensive set of modules geared towards logic and control
  • Place and wire control modules in Design View to create signal paths that process and route data
  • Define String Output and Network String Output modules and their use in controlling third-party devices
  • Use control modules to scale and taper control of external third-party controller audio signal
  • Explain how control modules can be used to create an emergency system
  • Utilize control modules is to accept a control signal from an external third-party controller to recall presets

Composer is the Windows open-architecture application used to program Radius, Prism, and Edge DSPs, Symetrix Dante Analog Input/Output Expanders, and select third party Dante endpoints. Control modules and custom logic may be used in a variety of ways. They can be used to trigger an emergency system mute. Control modules and custom logic can also be used to change camera position based on microphone signal.