RDL

Dante Integration

RDL is the world’s premier manufacturer of high-quality audio, video and control modules. The concept of APPLICATION-SPECIFIC MODULES was first introduced by RDL more than twenty years ago…a concept promoting unsurpassed value and performance. A concept which has attained widespread popularity and is a proven success in many thousands of facilities around the world. As the inventor of APPLICATION-SPECIFIC MODULES, RDL continues to lead the industry with solutions to specific problems as well as building blocks of quality system designs. RDL is on the cutting edge in product performance, fully robotic high-volume manufacturing and technical applications advice from a dedicated customer service staff. RDL stands ready with the resources and the commitment to assist with any need, from the simplest solution to the most complex installation.

View Website

DD-BN22 Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

• Dante Network Interface for Two Audio Inputs and Two Audio Outputs
• Inputs and Outputs on XLR Jacks on front panels
• Converts Two Standard Mic or Line Audio Sources to Dante Network Channels
• Converts Two Dante Network Audio Signals to Mic or Line Level
• Special Software Not Required for Module Setup
• Each Input is Switch Selectable for Mic or Line
• Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
• Switch-Selectable 48 V Mic Phantom (P48)
• Switch-Selectable Line Gain: Unity, 12 dB or 19 dB
• Each Output is Switch Selectable for Mic or Line
• Studio Quality, Low-Noise Performance
• High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance

DD-BN2M Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

• Dante Network Interface for Two Audio Inputs and Two Audio Outputs
• Inputs on Front-Panel XLR Jacks; Outputs on Rear-Panel Terminal Block
• Converts Two Standard Mic or Line Audio Sources to Dante Network Channels
• Converts Two Dante Network Audio Signals to Line Level
• Special Software Not Required for Module Setup
• Each Input is Switch Selectable for Mic or Line
• Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
• Switch-Selectable 48 V Mic Phantom (P48)
• Switch-Selectable Line Gain: Unity, 12 dB or 19 dB
• Each Output is Switch Selectable for Balanced +4 dBu or Unbalanced -10 dBV
• Studio Quality, Low-Noise Performance
• High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance

DD-BN2ML Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

• Dante Network Interface for Two Audio Inputs and Two Audio Outputs
• XLR and Mini-jack Front-Panel Inputs; Outputs on Rear-Panel Terminal Block
• Converts One Mic or Line and One Consumer Line Audio Source to Dante Network Channels
• Converts Two Dante Network Audio Signals to Line Level
• Special Software Not Required for Module Setup
• XLR Input is Switch Selectable for Mic or Line
• Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
• Switch-Selectable 48 V Mic Phantom (P48)
• Switch-Selectable Line Gain: Unity, 12 dB or 19 dB
• Mini-jack -10 dBV Input is Summed to Mono
• Each Output is Switch Selectable for Balanced +4 dBu or Unbalanced -10 dBV
• Studio Quality, Low-Noise Performance
• High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance

DD-BN31 Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 4

• Dante Network Interface for Four Audio Inputs and Four Audio Outputs
• One Mini-jack and Two XLR Front-Panel Inputs
• One Mini-jack Front-Panel Output; Two Outputs on Rear-Panel Terminal Block
• Converts Two Standard XLR Mic or Line Audio Sources to Dante Network Channels
• Each XLR Input is Switch Selectable for Mic or Line
• Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
• Switch-Selectable 48 V Mic Phantom (P48)
• Switch-Selectable Line Gain: Unity, 12 dB or 19 dB
• Mini-jack -10 dBV Input is Switch Selectable Stereo or Summed to Mono
• Converts Four Dante Network Audio Signals to Line Level
• Mini-jack -10 dBV Output is Switch Selectable Stereo or Mono (Left Channel)
• Rear Panel Outputs Switch Selectable Balanced +4 dBu or Unbalanced -10 dBV
• Special Software Not Required for Module Setup
• Studio Quality, Low-Noise Performance
• High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance

DD-BN40 Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2

• Dante Network Interface for Four Audio Inputs and Two Audio Outputs
• Four XLR Front-Panel Inputs
• Converts Four Standard XLR Mic or Line Audio Sources to Dante Network Channels
• Each XLR Input is Switch Selectable for Mic or Line
• Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
• Switch-Selectable 48 V Mic Phantom (P48)
• Switch-Selectable Line Gain: Unity, 12 dB or 19 dB
• Converts Two Dante Network Audio Signals to Line Level
• Rear Panel Outputs Switch Selectable Balanced +4 dBu or Unbalanced -10 dBV
• Special Software Not Required for Module Setup
• Studio Quality, Low-Noise Performance
• High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance

FP-NML2 Network to Mic/Line Interface

• Adapts Standard Audio Amplifiers to a Dante Network
• Converts Two Dante Network Audio Signals to Professional Line Level
• Each Output is Switch-Selectable for Mic or Line Level
• Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
• Exceptional Low-Noise and Low-Distortion Performance
• Crosstalk is Below the Noise Floor
• 24 Vdc Pass-Through Jack for Power Supply Sharing with RDL Amplifiers (FP-NML2)
• High Resolution 24 Bit Digital to Analog Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance
• Outputs Mute when Digital Audio Inputs are Inactive
• Normal or Hot-Standby Operation from PoE (Model FP-NML2P)
• Equipped for Rack Mounting or Surface Mounting

FP-NML2V Network to Mic/Line Interface with VCA

• Adapts Standard Audio Amplifiers to a Dante Network
• Converts Two Dante Network Audio Signals to Professional Line Level
• Separate VCA Provided for Each Output
• Outputs are Adjustable using RDL or OEM Remote Controls or 0 to 10 Vdc
• Individually Adjustable Outputs Ideal to Feed Two Separate Amplifiers
• Each Output is Switch-Selectable for Mic or Line Level
• Line-Level Outputs Provide +4 dBu with VCA at Maximum
• Output Amplifiers Provide More than 18 dB Headroom
• Exceptional Low-Noise and Low-Distortion Performance
• Crosstalk is Below the Noise Floor
• 24 Vdc Pass-Through Jack for Power Supply Sharing with RDL Amplifiers (FP-NML2V)
• High Resolution 24 Bit Digital to Analog Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance
• Outputs Mute when Digital Audio Inputs are Inactive
• Normal or Hot-Standby Operation from PoE (Model FP-NML2VP)
• Equipped for Rack Mounting or Surface Mounting

RU-BNF Format-A Bi-Directional Network Interface

• Converts RDL Format-A and Aux Source to Four Dante Network Channels
• Easy Installation with Format-A Connections on RJ45 through CATx Cable
• Format-A Audio Sources from Pairs A, B and C Converted to Dante
• Fourth Dante Audio Channel Fed from Unbalanced or Balanced Aux Line Input
• Front-Panel Gain Adjustment with Dual-LED VU Meter for Aux Input
• Signal LEDs Indicate Audio for Each of the Three Audio Source Format-A Pairs
• Converts Four Dante Network Audio Signals to RDL Format-A and Aux
• Three Dante Audio Signals Feed Format-A Output Pairs A, B and C
• Fourth Dante Audio Signal Feeds Auxiliary Balanced +4 dBu Line Output
• Format-A Pairs are Distributed to Three Separate Format-A Output Jacks
• Signal LEDs Indicate Audio for Each of the Four Received Dante Audio Signals
• External 24 Vdc Supply Powers All Connected Format-A Modules through RJ45 Jacks
• PoE (RU-BNFP) Powers Format-A Input and Primary Format-A Output RJ45 Jacks
• High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance
• LED Indicators Show Network Sync Status
• Normal or Hot-Standby Operation from PoE (Model RU-BNFP)
• Compatible with Wide Array of RDL Format-A Active and Passive Senders and Receivers
• Equipped for Rack Mounting or Surface Mounting

RU-FN Format-A to Network Interface

• Converts RDL Format-A and Aux Source to Four Dante Network Channels
• Easy Installation with Format-A Connections on RJ45 through CATx Cable
• Format-A Audio Sources from Pairs A, B and C Converted to Dante
• Fourth Dante Audio Channel Fed from Unbalanced or Balanced Aux Line Input
• Front-Panel Gain Adjustment with Dual-LED VU Meter for Aux Input
• Signal LEDs Indicate Audio for Each of the Three Format-A Pairs
• High Resolution 24 Bit Analog to Digital Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance
• Powers Remote Format-A Senders through Format-A Input Jack
• LED Indicators Show Network Sync Status
• Normal or Hot-Standby Operation from PoE (Model RU-FNP)
• Compatible with Wide Array of RDL Format-A Active and Passive Senders
• Equipped for Rack Mounting or Surface Mounting

RU-LB2 Line-Level Bi-Directional Network Interface

• Converts Standard Line-Level Audio Sources to Dante Network Channels
• Line-Level Inputs Accept Unbalanced -10 dBV or Balanced +4 dBu Signals with > 18 dB Headroom
• Front-Panel Gain Adjustment with Dual-LED VU Meter for Each Audio Input
• Converts Two Dante Network Audio Signals to Balanced Line Level
• Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
• Signal LEDs Indicate Audio for Each of the Received Network Signal Channels
• Interfaces Two Dante Inputs and Two Dante Outputs
• High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance
• LED Indicators Show Network Sync Status
• Normal or Hot-Standby Operation from PoE (Model RU-LB2P)
• Equipped for Rack Mounting or Surface Mounting

RU-LB4 Line-Level Bi-Directional Network Interface

• Converts Standard Line-Level Audio Sources to Dante Network Channels
• Line-Level Inputs Accept Unbalanced -10 dBV or Balanced+4 dBu Signals with >18 dB Headroom
• Front-Panel Gain Adjustment with Dual-LED VU Meter for Each Audio Input
• Converts Four Dante Network Audio Signals to Balanced Line Level
• Line-Level Outputs Provide +4 dBu with >18 dB Headroom
• Signal LEDs Indicate Audio for Each of the Received Network Signal Channels
• Interfaces Four Dante Inputs and Four Dante Outputs
• High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance
• LED Indicators Show Network Sync Status
• Normal or Hot-Standby Operation from PoE (Model RU-LB4P)
• Equipped for Rack Mounting or Surface Mounting

RU-MLB2 Mic/Line Bi-Directional Network Interface

• Interfaces Two Dante Inputs and Two Dante Outputs
• Converts Two Standard Mic or Line Audio Sources to Dante Network Channels
• Each Input is Switch-Selectable for Mic or Line
• No User or Installer Gain Adjustments are Required
• Automatic Microphone Gain of 40 dB for Condenser Mics and 60 dB for Dynamic Mics
• P48 Phantom is Provided on Each Microphone Input
• Line-Level Inputs Accept Unbalanced -10 dBV or Balanced +4 dBu Signals with > 18 dB Headroom
• Front-Panel Signal LED for Each Audio Input
• Converts Two Dante Network Audio Signals to Balanced Line Level
• Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
• Signal LEDs Indicate Audio for Each of the Received Network Signal Channels
• High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance
• LED Indicators Show Network Sync Status
• Normal or Hot-Standby Operation from PoE (Model RU-MLB2P)
• Equipped for Rack Mounting or Surface Mounting

RU-MLB4 Mic/Line Bi-Directional Network Interface

• Interfaces Four Dante Inputs and Four Dante Outputs
• Converts Four Standard Mic or Line Audio Sources to Dante Network Channels
• Each Input is Switch-Selectable for Mic or Line
• No User or Installer Gain Adjustments are Required
• Automatic Microphone Gain of 40 dB for Condenser Mics and 60 dB for Dynamic Mics
• P48 Phantom is Provided on Each Microphone Input
• Line-Level Inputs Accept Unbalanced -10 dBV or Balanced +4 dBu Signals with > 18 dB Headroom
• Front-Panel Signal LED for Each Audio Input
• Converts Four Dante Network Audio Signals to Balanced Line Level
• Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
• Signal LEDs Indicate Audio for Each of the Received Network Signal Channels
• High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance
• LED Indicators Show Network Sync Status
• Normal or Hot-Standby Operation from PoE (Model RU-MLB4P)
• Equipped for Rack Mounting or Surface Mounting

RU-NFD Network to Format-A Interface/Distributor

• Converts Four Dante Network Audio Signals to RDL Format-A and Aux
• Easy Installation with Format-A Connections on RJ45 through CATx Cable
• Three Dante Audio Signals Feed Format-A Output Pairs A, B and C
• Fourth Dante Audio Signal Feeds Auxiliary Balanced +4 dBu Line Output
• Format-A Pairs are Distributed to Three Separate Format-A Output Jacks
• Signal LEDs Indicate Audio for Each of the Four Received Network Signal Channels
• High Resolution 24 Bit Digital to Analog Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance
• Powers Remote Format-A Receivers through Primary Output Jack
• External 24 Vdc Supply Powers Format-A Receivers through All Output Jacks
• LED Indicators Show Network Sync Status
• Outputs Mute when Digital Audio Inputs are Inactive
• Normal or Hot-Standby Operation from PoE (Model RU-NFDP)
• Compatible with Wide Array of RDL Format-A Active and Passive Receivers
• Equipped for Rack Mounting or Surface Mounting

RU-NL2 Network to Line Level Interface

• Converts Two Dante Network Audio Signals to Professional Line Level
• Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
• Exceptional Low-Noise and Low-Distortion Performance
• Crosstalk Below the Noise Floor
• Signal LEDs Indicate Audio for Each of the Dante Audio Sources
• High Resolution 24 Bit Digital to Analog Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance
• LED Indicators Show Network Sync Status
• Outputs Mute when Digital Audio Inputs are Inactive
• Normal or Hot-Standby Operation from PoE (Model RU-NL2P)
• Equipped for Rack Mounting or Surface Mounting

RU-NL4 Network to Line Level Interface

• Converts Four Dante Network Audio Signals to Professional Line Level
• Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
• Exceptional Low-Noise and Low-Distortion Performance
• Crosstalk Below the Noise Floor
• Signal LEDs Indicate Audio for Each of the Four Dante Audio Sources
• High Resolution 24 Bit Digital to Analog Conversion
• Legendary RDL Analog Filtering Enhances Superb Audio Performance
• LED Indicators Show Network Sync Status
• Outputs Mute when Digital Audio Inputs are Inactive
• Normal or Hot-Standby Operation from PoE (Model RU-NL4P)
• Equipped for Rack Mounting or Surface Mounting