Frequently Asked Questions
Select a Category
Knowledge Base > Discontinued Products > ARC-K1
How many ARCs can I daisy-chain together?
The number of ARCs that can be daisy chained together will vary depending on the type of ARCs used and the cable lengths. Download Link: ARC Power Calculator.
What is ARC Audio?
The ARC Audio port provides a means to either break-in or break-out a single balanced analog audio line from an ARCs CAT5 cable. Note, not all ARCs support ARC Audio.
What cables are required to connect to ARCs?
A single standard straight-through CAT-5/6 cable will provide power and data to an ARC from the host DSP. The daisy-chain to subsequent ARCs also uses CAT-5/6.
Legacy DSPs that pre-date the ARC Port (RJ-45) communicate to ARCs with a twisted-pair (A, B, Ground) for RS-485 data. In this scenario a local external transformer provides up to 24VDC to the ARC.
ARC Power Calculator
An ARC’s power requirements vary depending on the voltage supplied to it. For example, an ARC-2e at 24V DC uses approximately 55 mA, while at 7V DC it uses approximately 170 mA maximum. As the voltage varies from 24 to 7 VDC, the current requirement increases accordingly. ARCs can be daisy-chained and fed power over this daisy-chain from an ARC-PSe or other device. However, as the length of the cable increases, so does the resistive line loss, which lowers the voltage available at each subsequent ARC. The actual power drain on each output from the powering device can vary substantially depending on the number of ARCs and the distance each of them is separated by. In order to assist with system design, Symetrix has available a Microsoft Excel spreadsheet that can help a system designer determine power requirements based upon cable length, number of ARCs and the power supply to be used.
Download Link: ARC Power Calculator.
What direction is ARC-Audio sent?
One channel of audio can be sent either way.
What distance can an ARC be from the host DSP?
The distance varies greatly depending on the type of ARC, the gauge of the cable, and the number of arcs chained together. Download Link: ARC Power Calculator.
Where can I find AutoCAD files for the modular ARC?
Where can I find a Quick Start Guide for the Modular ARCs (ARC-K1, ARC-SW4, ARC-SWK, ARC-XLR, ARC-MIC, ARC-EXK and ARC-EX4)?
What types of parameters can ARCs control?
ARCs are extremely flexible and can be assigned virtually any real-time parameters depending on what host DSP it is controlling. Generally ARCs are used for volumes, buttons, and presets.
How do I upgrade ARC firmware in Designer?
ARC firmware is managed in Designer in the Controller Manager.
Tools > Controller Manager.