Knowledge Base

Select a Category

Knowledge Base > Installed Sound DSP > Edge

Where can I download archived versions of Composer software?

Archived versions of all final public releases of Composer software are listed in the table below. The software runs on a Windows PC and is used to configure, design, and control Composer-based products. For new designs we highly recommend using the latest version of Composer, however archived major release versions can be found below for legacy compatibility and/or troubleshooting requirements. All firmware files are included as part of the downloaded Composer software package. The Composer firmware versions and Dante Kernels listed below are to help in cross-referencing the firmware running on the installed DSP(s) with the corresponding version of Composer that should be downloaded.

To communicate with Symetrix hardware from a given version of Composer, it may be necessary to upgrade (or downgrade) firmware in each hardware device. This can be done directly from the Composer application and only takes a few minutes per device. Firmware upgrade is done from the Composer Hardware menu.

Composer Version Composer Firmware Dante Kernel Release Notes SymVue Version
1.06 1.026 3.5.3 1.06 N/A
1.23 1.216 3.6.4 1.23 1.23
2.03 2.013 3.6.4 2.03 2.03
2.51 2.502 3.6.4 2.51 2.51
3.02 3.007 3.7.3 3.02 3.02
4 4.002 3.7.3 4 4
4.1 4.100 3.7.3 4.1 4.1
5.01 5.002 3.7.3 5.01 5.01
5.1 5.100 3.7.3 5.1 5.1
5.2 5.201 3.7.3 5.2 5.2
5.3 5.301 3.7.3 5.3 5.3
5.4 5.400 3.7.3 5.4 5.4
5.41 5.404 3.7.3 5.41 5.41
5.5 5.500 3.7.3 5.5 5.5
5.6 5.605 3.7.3 5.6 5.6
6.0.2.33 6.0.0.26 4.0.7 6 6
7.0.2.43 7.0.0.31 4.0.7 7 7
7.1.2.46 7.1.2.37 4.0.7 7.1 7.1
7.2 7.2.0.30 4.0.7 7.2 7.2