Frequently Asked Questions

Select a Category

Knowledge Base > Discontinued Products > 8 In

Can I plug a microphone directly into a SymNet 8x8DSP, 8 In, or BreakIn 12?

Yes. All SymNet 8×8 DSP, 8 In and BreakIn 12 units’ with analog audio inputs are equipped with software controlled mic/line inputs. In the 8×8 and 8in, digitally controlled precision analog attenuators are part of the analog input stages. Adjustments made to the input gain block in SymNet Designer actually trim the level of analog signal being sent to the A/D converter – allowing you to maximize the dynamic range performance of the SymNet hardware. On the BreakIn12, software controls the coarse gain levels of the mic preamp and fine trim is done with DSP modules in SymNet Designer.

How can we help?