Where can I find an Ethernet application with IP capable Symetrix products?
SymNet Remote Terminal is a UDP terminal test application for testing Ethernet-based control for Symetrix products. SymNet Remote Terminal.zip
: DigIO 12x12 DSP
What is DSP and how does to apply to Composer-based hardware?
Advanced Digital Signal Processing is at the core of our Composer-based hardware. Our solutions simply design and deliver superb fidelity, adding value for designers, integrators, and end users.
How much latency is there in a SymNet SymLink system?
This question has a three part answer since the digital signal path through a SymNet system has three different major components. Converter delay: Approximately 850 microseconds for the AD, and 624 microseconds for the DA. One DSP core: Maximum delay…
How many SymNet units can I connect together with SymLink?
There can be a maximum of 16 SymNet hardware units in a SymLink ring. This includes the 8x8 DSP, 8in DSP, 8out DSP, CobraLink, BreakIn12, Breakout12, and DigIO 12x12 DSP.
Can SymLink busses be re-used to accommodate higher channel counts?
Yes, this can get confusing so it shouldn’t be attempted until users are familiar with the SymLink architecture. SymLink is a circular bus. The transmit port from one unit is connected to the receive port of the next unit using…
Will SymNet SymLink and Express hardware work with AMX or Crestron control systems?
Yes. There is a dedicated RS-232 port on the rear panel of all 8x8, 8in, 8out, DigIO and CobraLink units for this purpose. This port can be used simultaneously with the host computer connected to the front panel RS-232 port,…
What are some DigIO 12×12 DSP applications?
Home Theater and Live Sound Processor The DigIO allows up to twelve (12) digital sources to interface with a SymNet system. DigIO has onboard DSP and can act as a stand alone device as well as digital I/O expansion for…
Where can I find AutoCAD files for the DigIO 12×12 DSP?
DigIO 12x12 DSP AutoCAD files
Where can I find a Quick Start Guide for the DigIO 12×12 DSP?
DigIO 12x12 DSP Quick Start Guide
What kind of DSP is used in SymNet 8×8, 8 In, 8 Out and DigIO?
SymNet 8x8, 8in, 8out and DigIO units use Analog Devices SHARC ADSP-21065L DSPs running at approx. 66MHz. The 8x8 has four, and the 8in, 8out and DigIO each contain two DSPs. The four DSPs in the 8x8 can deliver a…
