Product Filter

W-Series Controllers

What can be controlled with the W-Series rotary encoder?
The Rotary encoder can be configured to adjust any audio function in a Symetrix DSP that is controllable. The encoder can be pushed to move between up to eight function menus.† Common functions that typically would be assigned to a menu include gain control, mute ON/Off, tone control, and source select (up to 32 sources). (Example 1) For a background music system with four zones: Menu 1: Zone 1 Volume Menu 2: Zone 2 Volume Menu 3: Zone 3 Volume Menu 4; Zone 4 Volume Menu 5: Zone 1 Source Selector Menu 6: Zone 2 Source Selector Menu 7: Zone 3 Source Selector Menu 8: Zone 4 Source Selector (Example 2) A personal monitor mix system Menu 1: Lead Guitar Volume Menu 2: Rhythm Guitar Volume Menu 3: Bass Volume Menu 4; Keyboard Volume Menu 5: Vocal 1 Volume Menu 6: Vocal 2 Volume Menu 7: Choir Volume Menu 8: Podium Volume (Example 3) House of Worship Control Master Control Menu 1: Projector A On/Off Menu 2: Projector B On/Off Menu 3: Projector A Source PC 1 PC 2 Camera 1 Camera 2 Blu-ray Menu 4: Projector B Source PC 1 PC 2 Camera 1 Camera 2 Blu-ray Menu 5: Lights Brightness 1-10 Menu 6: Audio Mode Console/Automix Menu 7: Master Audio Volume Gain 1-10
Can buttons on the W-Series controller be used to select the function on the rotor encoder?
Yes, the encoderís function can be changed either by pushing the encoder or by using the buttons. Setting the Encoder Button mode to ëSelect and Setí (Unit Properties > Edit Remote Settings) will allow the encoder button to follow the individual buttons.
What security is provided on W-Series to prevent unauthorized adjustments?
Each individual control panel in a system can be easily locked out for temporary security purposes if so desired. When security is activated, a four-digit, pre-programmed PIN is used to unlock the controller. The panel automatically locks after a pre-programmed idle time. These settings are located in the W Remote properties; Wake Security, Idle Mode, Sleep Mode.
How are W-Series network settings configured?
Network configuration of W-Series controllers is done in the same manner as Symetrix DSP network settings are configured, using the unit properties dialog box.† Click below for a screenshot on network setting configuration: https://symetrixinc.com/wp-content/uploads/2023/07/FAQ-IMAGE_W-Series_Configuration.webp
How is a W Series remote added to a system design in Composer?
When in the site view of Composerô, go to the toolbar and find the IP Remotes menu. Expand the IP Remotes menu and locate the desired controller type. Either double click the desired controller or drag it into the site view window.†
How are W-Series displays configured?
The display labeling is configured in the unitís properties page that appears in Composerô when the control unit is clicked in the site view of Composerô. The displays can be configured to display text or symbols simply by changing the ìdisplay typeî in the W Series properties window in Composerô. The font and font size can be configured along with horizontal and vertical alignment.† Bar Graph display mode can be set to disabled, up, down or moving. Composerô software includes a control simulator that allows the appearance of the display labeling to be seen before a control unitís programming is pushed to a unit. Encoder display units can be in dB, percentage or a count with the ability to set display minimums and maximums.
What can be controlled with the buttons on a W Series?
The button can be configured to adjust any function in a Symetrix DSP that is controllable. In addition, Symetrix DSPs can control the third-party devices included in the Toolbar of Symetrix ComposerTM software and other third-party devices via RS-232 (Radius and Edge), TCP or UDP.† Buttons can be configured to be momentary, latching or as radio buttons. This allows them to do things like trigger presets, adjust volume levels, perform source selection, mute/unmute audio and change signal routing. There is a caveat regarding the radio buttons ñ radio buttons must be sequential.
Why does my W Series remote show no archive or Invalid in System Manager?
The ìarchiveî refers to the site file programming itself and DSPs are the only devices that have a location to store an archive, and actively do store one. The W Series remotes have their own memory and retain their respective programming, but do not hold a copy of the site file archive.
How are parameters and control functions assigned to a W-Series controller in Composer?

Configuration takes place in Composer software. Right-click directly on a parameter: When you right-click directly on a parameter, a pop-up menu appears with an option to Set Up Remote Control. This leads to the Setup Remote Control Dialog box where the desired remote-control device can be selected.

Can Parameters be Linked across Multiple W-Series Controllers?
Yes, linking allows multiple controls to remain linked regardless of how their values are changed. Not only can W Series remotes be linked with other W Series but also with ARC, ARC-WEB, Control Server and TP controllers.†